> For the complete documentation index, see [llms.txt](https://docs.medialooks.com/direct-take-docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.medialooks.com/direct-take-docs/direct-take/documentation/conversion-settings.md).

# Conversion settings

There are two types of conversion in DT - global conversion and local conversion.

With the *global conversion* settings, you can convert all the Sources to the same parameters. You can open global conversion settings with the **Settings** button:

![](/files/-Mb1g3gzLXMSEaP-LS-e)

Once enabled, you can change the video and audio parameters. *Original* means no conversion.

Video parameters:

* Resolution - available options are: Original (don't change), PAL, NTSC, HD720, FullHD, UHD
* Frame rate - available options are: Original, 23.98, 24, 25, 29.97, 30, 50, 59.94, 60.
* Interlacing - different options to work with interlaced video (progressive, top field first, bottom field first, etc.)

Audio parameters:

* Sample rate - Original, 48000, 44100
* Audio channels - Original, 1,2,4,8,16
* Sample bits - Original, 16, 32

Click the **Save** button to apply the changes.

With the *local conversion* settings, you can convert each Destination to the particular format. You can open local conversion settings with the **Conversion Settings** button from Destination settings panel:

<figure><img src="/files/1iIao3ATSZIOIqXjyWXQ" alt="" width="212"><figcaption></figcaption></figure>

There you can find the same fields (resolution, frame rate, etc):

<figure><img src="/files/dVq6TJh1fITMoX8AhdfR" alt="" width="209"><figcaption></figcaption></figure>